RU
Professional sound for business
Acoustic systems and sound equipment for restaurants, clubs, concert halls, theaters, sports facilities, and churches. Acoustic calculations, delivery, installation, and setup—a full turnkey service.
SEND A REQUEST TO THE MANAGER
Professional sound reinforcement systems: from design to setup
We don't just install speakers. We solve engineering challenges: how to ensure uniform volume throughout a complex auditorium, how to eliminate unwanted reflections, and how to achieve high speech intelligibility. We work with venues of all sizes, from a small jazz club to an ice rink.
Sound solutions for your type of facility
We use only professional equipment
Systems and separate equipment for concert sound
How we create concert sound
A transparent cycle: from acoustic calculations in EASE to the final soundcheck on site.
1
Acoustic audit
Measuring room parameters, identifying reverberation and echo zones.
2
Modeling and design
Creation of a 3D model of the object for precise calculation of suspension angles and sound pressure.
3
Equipment supply
Selection and direct supply of line arrays, mixing consoles and DSP processors.
4
Installation works
Professional suspension and installation of equipment in compliance with all safety and load standards.
5
Commissioning and tuning
Fine-tuning of the path, equalization of the system to suit the specific architecture of the hall.
6
Delivery and training
Training your sound engineers on how to operate complex digital equipment.
Our advantages
We deliver every project with measurements: the sound is uniform, speech is intelligible, and the equipment is protected.
Uniform coverage
No loud speakers overhead or dead zones. The music sounds soft and uniform throughout the entire room.
Engineering approach
We work strictly according to specifications and regulations. All systems undergo mandatory testing before delivery.
Expertise in service
Having our own repair facility allows us to provide an extended warranty on installation.
The cost of professional sound
| Engineer's visit and inspection of the site | For free |
| Acoustic calculation and design | from 35,000 rubles. |
| Installation of an acoustic system (per point) | from 1,000 rubles. |
| Assembly and wiring of a rack cabinet | from 10,000 rubles. |
| Setting up the system by measurements | from 15,000 rubles. |
| Turnkey sound system for an establishment« | from 300,000 rubles. |
The exact cost is determined based on the system's components after a site inspection. Equipment is priced separately based on the specifications. The estimate is fixed before work begins and remains unchanged during the process.
Get a consultation and a commercial offer
Our facilities
All objects
Sound equipment that fits the task, not "more powerful speakers"«
Proper sound doesn't start with choosing acoustics, but with the question of "what should happen in the room?" Background music and announcements are one system, live performances are another, and the dance floor is a third. A professional sound system consists of three parts:
- Acoustic systems: Large line arrays for halls and stadiums, compact point-of-sound speakers for smaller venues, and subwoofers for dense, noticeable bass. The composition is determined by the room and the task, not by a budgetary guess.
- Strengthening and protection: Digital amplifiers with processors - they adjust the sound to the specific characteristics of the room and physically prevent the speakers from burning out at peak volume.
- Remote controls and switching: Digital mixing consoles and audio transmission via network cable – without background noise and thick bundles of wires running across the entire hall.
Acoustic calculation: hear the results before installation
No guesswork. Before offering equipment, we create a computer model of your room and place virtual speakers in it. The program shows how the sound will sound in a real room—where it will be loud, where it will be quiet, and where speech will be inaudible.
What does this give to the customer:
- Guaranteed results: The coverage map shows you in advance quiet corners and areas where the speaker is too loud. We adjust the virtual acoustics until the sound is consistent everywhere—free in the model, not at your expense on-site.
- Budget savings: You don't buy extra kilowatts "just in case" - the calculation shows exactly the power your hall needs.
- Suspension safety: The program calculates the weight of the acoustics and the load on the trusses and floors—heavy clusters hang over people's heads with a multiple safety factor.
Working documentation: installation without surprises
For each project, we prepare a complete documentation package for electricians, builders, and our installers to work from: equipment rack assembly diagrams, structural signal flow diagrams, speaker layout plans with precise angles, and a cable log detailing the length and type of each line. No one gets tangled up in wires on-site—all decisions are made on paper before work begins.
Installation of sound equipment
Sound editing is a process fraught with pitfalls, from cable interference to the safety of heavy rigs. What our standard includes:
- Speaker suspension: Working at height with certified winches, steel safety cables, and tested fasteners. Loads on trusses and floors are calculated in advance.
- Cable routes: Concealed wiring or neat trays, each wire labeled according to the logbook—in a year, any engineer will understand the system in minutes.
- Assembly of hardware racks: The well-designed layout of the amplifiers and processors ensures that the equipment does not overheat, and access for maintenance remains convenient.
Sound settings: latest 20% quality
Even expensive equipment sounds average out of the box—the system needs to be tailored to the specific venue. We do this not by ear, but by measurements:
- We remove the noise from the hall: We find the frequencies at which the room "buzzes" and eats away at speech intelligibility, and carefully cut them out of the sound.
- We check each line: Before the first launch, we test the polarity of all speakers - one mixed-up pair of wires can ruin the sound of the entire system.
- We measure, not guess: Measurement microphones and a professional analyzer show the actual picture of the sound in the hall in real time.
- We stitch the bass to the rest of the system: We coordinate the subwoofers with the main speakers in time and phase - the bass becomes clear and punchy, and not a smeared rumble.
Why you should trust your sound to "Puskonaladka"«
We offer a full service: acoustic calculations, sound equipment supply, installation, setup, and staff training. You don't need to understand polar patterns and protocols—tell us what you need in your venue, and we'll handle the engineering. Whether it's a restaurant, club, concert hall, or church, the result is the same: smooth, intelligible, and controlled sound.
Submit a request – we’ll find out your project’s objectives and prepare a commercial proposal.
Frequently asked questions
It depends on the usage scenario, not the space. Background music and announcements require a public address system; live music and performances require a concert sound system with a control panel; and the dance floor requires a separate system with subwoofers. Often, two or three scenarios are combined in a single venue, and the systems are designed in tandem. Tell us what you need to happen in the hall, and we'll suggest a system that fits your needs and budget.
Durability and predictability: professional acoustic systems are designed for hours of daily use at high volume, protected by processors against overload, and provide uniform coverage throughout the room, rather than a single, loud spot at the speaker. Home and mass-market karaoke equipment, when used commercially, lasts for months and produces unpredictable sound—it's cheaper to install the right one right away.
The calculation shows the results before purchasing equipment: the room model shows coverage, volume at each point, and speech intelligibility. This protects against two mistakes: "buying too little" and "overpaying for unnecessary kilowatts." An acoustic calculation is a paid engineering service included in the design process; for comprehensive equipment projects, it is included in the price.
Yes. A common situation: the equipment is decent, but it sounds bad—the phases aren't aligned, there's no equalization for the venue, the amplifiers aren't matched to the speakers. We conduct an audit, reconfigure the system based on measurements, and, if necessary, make targeted adjustments. It's much cheaper than replacing the entire system, and the difference is immediately noticeable.
The range is wide: a compact cafe sound system and a concert hall sound system are incomparable budgets. The price includes equipment (as per specifications), installation, and setup. After a free on-site visit and clarification of the tasks, we prepare a commercial proposal with a fixed estimate—this estimate remains unchanged throughout the project.